RazoRock Recurve Double-Edge Safety Razor-RazoRock-ItalianBarber
RazoRock Recurve Double-Edge Safety Razor-RazoRock-ItalianBarber
RazoRock Recurve Double-Edge Safety Razor-RazoRock-ItalianBarber

RazoRock Recurve Double-Edge Safety Razor

Add To Wishlist
Regular price $ 99.99 USD
/
Shipping calculated at checkout.

  • In stock, ready to ship
  • Backordered, shipping soon

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

RazoRock RECURVE Double-Edge Safety Razor - CNC 316L Stainless Steel

VARIOUS OPTIONS AVAILABLE: Use Drop Down Menu to Choose - EACH With Hollow HD Long (100mm) Handle in order from smallest gap (1) to largest gap (5)

  1. RazoRock Recurve RC80 : 0.80mm gap with +0.025mm exposure (+0.001")* - (MILD-MEDIUM)

  2. RazoRock Recurve RC80 PLUS "+" : 0.80mm gap with +0.127mm* exposure (+0.005")* - (MEDIUM)

  3. RazoRock Recurve RC100 : 1.00mm gap with 0.00mm exposure (0.000")* - (MILD)

  4. RazoRock Recurve RC100 PLUS "+" : 1.00mm gap with +0.102mm exposure (+0.004")* - (MEDIUM-AGGRESSIVE)
  5. RazoRock Recurve RC112 : 1.12mm gap with 0.025mm exposure (0.001")* - (MILD-MEDIUM)
  6. RazoRock Recurve RC120 PLUS "+" : 1.20mm gap with +0.152mm exposure (+0.006")* - (AGGRESSIVE)

*Exposure measurements are an average and accurate within ±0.001". Blade tolerances may vary as well.

The Recurve head design uses two precisely engineered curves to gently tighten and strengthen the razor blade before it touches your skin. This built-in pre-tension keeps the blade firm and steady, reducing flex and chatter when cutting through coarse or dense stubble. The result is an incredibly smooth, controlled shave with far less tugging.

Unlike razors that rely on a single curve for blade tension, the dual-curve recurve system creates exceptional rigidity while allowing the razor head to remain slim and agile. Any minor vibration that does occur happens at a much higher frequency, which helps maintain a sharper cutting edge for longer.

The sides of the razor guard are tapered right to the edges of the blade, a feature we call our Edge-to-Guard design. This gives you unbeatable detailing control when shaping sideburns, refining a goatee, or lining up a beard with precise definition.

The minimalist engineering keeps the razor light and perfectly balanced. Its sleek, compact profile also makes it effortless to reach tight areas, such as under the nose.

To maximize performance, the blade is clamped firmly from both the top and bottom as close as possible to the cutting edge. This provides outstanding stability and allows the razor to glide through even the thickest hair with remarkable ease, delivering a clean, confident cut every time.

The RazoRock RECURVE uses standard double-edge blades—no gimmicks, no proprietary refills. At 10–15 cents per blade, each blade lasts 4–5 shaves.
Stop paying $2–$5 for cartridge heads that clog and irritate.

Sustainable & Plastic-Free

Say goodbye to plastic waste. All-metal construction and recyclable DE blades make the DAILY an eco-friendly and guilt-free grooming choice.

The RazoRock RECURVE can be used with any M5 x 0.8 threaded handle. We offer a wide selection of premium RazoRock handles, or you can purchase the razor head separately and pair it with the handle of your choice.

NOTE: When assembling or disassembling the razor, we recommend holding the razor head securely in a towel while tightening or loosening the handle. The Recurve razor applies significant clamping force to the blade, and using a towel provides added grip and protection, especially when your hands are wet, helping prevent slips and ensuring safe handling.

Razor Head Weight: ~28g

Handle: RazoRock Hollow HD Long Handle Weight : ~76g

The handle is 100 mm long and the diameter of the butt end is 14 mm. The diameter of the handle 13 mm in the middle.

PLEASE NOTE: This razor is ONLY available as a complete razor in very limited quantities

Material: 316L Marine Grade Stainless Steel

PROUDLY MADE IN ONTARIO, CANADA

Finish: Please note, these razors are tools, not jewels. We use a vibratory tumbling finish process which maintains the highest possible tolerances for the razors. This means the razors will not be mirror finished and will not be mark-free. The razors may have some milling marks or finishing marks. The razors can always be jewelry polished by the client later but our goal is to sell the razor at the best possible tolerances and lowest possible price. The metal-on-metal contact from the handle locking against the base-plate will create a ring mark on the base. It's common for handles to have micro dents from the tumbled finish.

Finish: 3 stage, 24 hour, machine vibratory finish. It's important to note that our finish is designed to de-burr and make the pieces smooth with minimum effect on machining tolerances. It's a tool-like finish and not a mirror-type high polish; each piece is unique (no two pieces will be identical). We don't believe in hand polishing our machined safety razors because it's self-defeating. We spend so much time and effort getting the tolerances tight, a hand polish will just ruin these tolerances. We would rather give you a quality tool-like finish at a great price and leave it up to you if you want to put a jewelry type polish or gun-kote at the razor later at additional cost.

Note: Blades are not included

You may also like